Professional Water Damage Cleanup Tips

water damage cleanup treasure valley, water damage repair treasure valley, water damage restoration treasure valleyIn the Treasure Valley, rain is not uncommon. Although it does not rain an excessive amount, it is still noticeable. Due to these rainfalls, and other weather conditions, water damage can become an issue to homeowners. Burst pipes, overflowing drains, and backed up sewer pumps are just a few examples. 

Water Damage Cleanup In Treasure Valley

Events like these happen all the time. However, have you ever wondered what the process would be to clean up such a mess? You may think that just using a few clean towels would do the trick. That is not the case. There are quite a few steps that need to take place in order to execute the water damage cleanup process effectively. Here are just a few examples: 

  1. Inspection and assessment of affected areas:

    The water damage cleanup professionals, like those at UltraClean in Treasure Valley, will come into the commercial building and inspect the type of water damage that has occurred. They will be able to set up a place to make sure that the water damage is contained and that no one will get in the way of their work.

  2. Water removal:

    This is pretty self-explanatory, but it is important to have the water removed from the infected area. If water is left standing for too long, mold and mildew can begin to grow, and that would cause problems in the future. 

  3. Anti-microbial application:

    These professionals can use their equipment to properly treat the area to ensure it is safe for future use.

  4. Drying- air movement:

    It is important to make sure that air is moving in the area to ensure proper drying.

  5. Drying- dehumidifying:

    Things like mold enjoy nothing more than wet and warm environments. Making sure to take out the moisture in the air is vital in drying.

It is important to take note of the type of water damage that has happened. Water damage from a clean sink may require only water extraction and drying, where contaminated water or wastewater requires additional steps to decontaminate and sanitize the affected areas and items. Residential homes can have different cleaning techniques than commercial buildings. As a homeowner, it is important to understand where the source of the water is coming from to ensure the proper cleaning techniques. Having the commercial business check for the source of the water damage will ensure effective clean up to occur. Every business is different, but they will also want to make sure that the water damage cleanup professionals do a number of things to ensure the best quality. Here are a few ideas: 

  1. Water Damage Restoration
  2. Structural Drying
  3. Mold Inspection
  4. Flood Restoration
  5. Sewage Damage Cleanup
  6. Water Extraction
  7. Contents Cleaning and Drying
  8. Odor Removal

Water damage is no funny business. It can cause some serious stress and grief if not taken care of. Having professionals who know how to handle water damage cleanup will ensure that the job is done quickly and effectively. So if you notice any water damage do not hesitate to call the water damage cleanup professionals today!

Water Damage Cleanup: Preventing Hot Water Heater Leaks

water damage cleanup treasure valley, water damage restoration treasure valley, water damage repair treasure valley

Water damage in your Treasure Valley home can be caused by multiple sources. Malfunctioning appliances are some of the most common causes of water damage, and the most catastrophic is the water heater. Conventional water heater tanks house a reservoir between 20 and 80 gallons of hot water. Once the hot water tap is turned on and hot water leaves the top of the tank, cold water immediately enters through the bottom of the tank to ensure that the reservoir of water is always full. Because of the endless supply of water, when the water heater tank leaks water will continually flow into your home because of the device’s ability to constantly refill itself. If your home has a water heater, our water damage cleanup experts would like to introduce  a few ways you can prevent leakage in the first place and respond quickly to prevent a costly water damage cleanup.

Water leakage around the base of the water heater tank can be caused by a couple different reasons. Some of the most common causes are:

  • Loose connections 
  • Loose heating element
  • Bad gasket
  • Corrosion in the tank
  • Leaks from a nearby plumbing connection
  • Excessive pressure buildup
  • Faulty temperature relief valve

To avoid leaks caused by poor connections, loose valves, or the actual tank itself, the US Department of Energy recommends routine maintenance on water heaters. Doing so can save you from a costly water damage cleanup. To keep your water heater operating properly and efficiently, some maintenance procedures that need to be performed are:

  • Flush a quart of water from the storage tank every 3 months

When water sits in the tank too long, it can begin to build up materials. This build up can lead to corrosion inside the tank, which can cause the tank to spring a leak. By flushing water through the storage tank regularly, you can help prevent corrosion.

  • Check the pressure and temperature valve at least every 6 months

When pressure builds up inside the tank because of excessive temperature, it will cause unnecessary strain. After so long, that pressure will need a way out, and will cause leaks. Pressure and temperature valves will help to catch changes in temperature that will cause pressure to increase, and also detect excessive pressure levels so that they can be taken care of before they cause leaks.

  • Inspect the anode rod every 3 to 4 years

The anode rod is a huge factor in extending the life of your water heater. An anode rod is a steel core wire surrounded with aluminum, magnesium, or zinc. The rod is screwed into the top of your water heater tank, and is designed to corrode in place of your water heater lining. Over time, the rod will become completely corroded, and then it will no longer be able to protect your water heater tank. The average rod lasts between 4-5 years, but if you replace it every 3-4 years you can prevent excess corrosion and exposure. Without replacing the anode rod, you risk rusting inside your water heater, which will likely lead to a leak.

  • Install an automatic water shut off valve

To prevent major flooding from the water heater, the automatic water shut off valve will be able to detect the presence of water beneath the water heater and shut off the water supply before there is extensive water damage.

Water Damage Cleanup In Treasure Valley

If you find yourself suffering from water damage in your home, whether from a malfunctioning water heater or any other source, call your water damage cleanup experts at UltraClean right away.